1070-SC

Fully rubber covered OD, single primary sealing lip with garter spring loaded.The most popular type in today’s industry.

Metal Meterials 
Mild steel : BS449 EN2 CR4 
Stainless steel  : BS1449 Part 2 1983 Grade 316 
Brass  : BS 2870 1987
Sealing lip: Nitrile,Viton,Epdm,Silicone ,Ptfe, Polyacrylate and Neoprene

1071-TC

Fully rubber covered OD, primary sealing lip with garter spring and secondary dust lip.extra dust lip to prevent contamination from penetrating the system

Metal Metarials 
Outer/Inner shell and base washer : Mild steel as standard
Garter Spring    :Galvanized steel as standard
Also available in non ferrous metals
Sealing Lip :Nitrile,Viton,Epdm,Silicone ,Ptfe, Polyacrylate and Neoprene


072-SB

Metal cased single lip seal with garter spring Loaded The most popular type in today’s industry.

Metal Materials 
Outer/Inner shell and base washer : Mild steel as standard
Garter Spring      : Galvanized steel as standard
Leaf Spring Retainer : Stainless steel (AISI 301 S21) as standard

Sealing Lip        : Nitrile,Viton,Epdm,Silicone ,Ptfe, Polyacrylate and Neoprene
Also available in non ferrous metals


1073-TB

Metal cased Double lip Seal with Spring Loaded. extra dust lip to prevent contamination from penetrating the system.

Metal Materials 
Metal Parts           :Stainless Steel (BS1449 Pt2 1983/ANSI 1316)
Sealing Element    : Black or White P.T.F.E
Captive Elastomer: Fluoroelastomer (up to 150°C)
Sealing Lip          : Nitrile,Viton,Epdm,Silicone ,Ptfe, Polyacrylate and Neoprene



1074-SA

Metal outer and inner case, single primary sealing lip with garter spring loaded.

Metal Materials 
Outer/Inner shell and base washer:Mild steel as standard
Garter Spring     : Galvanized steel as standard

Sealing Lip          : Nitrile,Viton,Epdm,Silicone ,Ptfe, Polyacrylate and Neoprene
Also available in non ferrous metals


1075-TA

Metal outer and inner case, primary sealing lip with garter spring loaded and secondary dust lip.

Metal Materials 
Outer/Inner shell and base washer:Mild steel as standard
Garter Spring     : Galvanized steel as standard
Also available in non ferrous metals :
Sealing Lip          : Nitrile,Viton,Epdm,Silicone ,Ptfe, Polyacrylate and Neoprene


1076-VC

Fully rubber covered OD, without garter spring.Springless oil seal with compact cross section developed to seal needle bearings. Good grease seal. Allows very compact constructions.The rubber elastomer outer covering tolerates thermal expansion as well as roughness in the housing bore. There will be no fretting corrosion. Furthermore, damage of the housing bore will be prevented when frequently replacing the seal. This qualifies for sealing gaseous or liquid media.

Sealing Lip          : Nitrile,Viton,Epdm,Silicone ,Ptfe, Polyacrylate and Neoprene


1077-KC

Fully rubber covered OD, without garter spring and secondary dust lip.Springless oil seal with compact cross section developed to seal needle bearings. Good grease seal. Allows very compact constructions.The rubber elastomer outer covering tolerates thermal expansion as well as roughness in the housing bore. There will be no fretting corrosion. Furthermore, damage of the housing bore will be prevented when frequently replacing the seal. This qualifies for sealing gaseous or liquid media.

Metal Materials 
Outer/Inner shell and base washer: Mild steel as standard

Sealing Lip          : Nitrile,Viton,Epdm,Silicone ,Ptfe, Polyacrylate and Neoprene


1078-VB

Metal cased springless oil seal with compact cross section developed to seal needle
bearings. Good grease seal. Allows very compact constructions,without garter spring.Springless oil seal with compact cross section developed to seal needle bearings. Good grease seal. Allows very compact constructions.The rubber elastomer outer covering tolerates thermal expansion as well as roughness in the housing bore. There will be no fretting corrosion. Furthermore, damage of the housing bore will be prevented when frequently replacing the seal. This qualifies for sealing gaseous or liquid media.

Sealing Lip          : Nitrile,Viton,Epdm,Silicone ,Ptfe, Polyacrylate and Neoprene


1079-KB

Metal cased springless oil seal with compact cross section developed to seal needle
bearings. Good grease seal. Allows very compact constructions.and secondary dust lip.
Metal Materials 
Outer/Inner shell and base washer: Mild steel as standard

Sealing Lip          :Nitrile,Viton,Epdm,Silicone ,Ptfe, Polyacrylate and Neoprene


1080-DC

Rubber covered Double lip double gater spring Seal with Spring Loaded ,extra dust lip to prevent contamination from penetrating the system
Metal Materials 
Outer/Inner shell and base washer: Mild steel as standard

Sealing Lip          :Nitrile,Viton,Epdm,Silicone ,Ptfe, Polyacrylate and Neoprene


1081-DB

Metal cased Double lip double gater spring Seal with Spring Loaded ,extra dust lip to prevent contamination from penetrating the system
Metal Materials 
Outer/Inner shell and base washer: Mild steel as standard

Sealing Lip          :Nitrile,Viton,Epdm,Silicone ,Ptfe, Polyacrylate and Neoprene

Also available in non ferrous metals


1087-VA- V Ring/wiper seal

V RINGS Features a straight back that reduces spare requirements.The V-Seal is an all rubber seal for dirt exclusion, that mounts directly on the shaft and seals axially against the counterface, housing, bearing race, seal case or similar surfaces.


1088-VS-V-Ring/wiper seal

V RINGS Features a straight back that reduces spare requirements.The V-Seal is an all rubber seal for dirt exclusion, that mounts directly on the shaft and seals axially against the counterface, housing, bearing race, seal case or similar surfaces.


1089-VL- V Ring/wiper seal

V RINGS Features a straight back that reduces spare requirements.The V-Seal is an all rubber seal for dirt exclusion, that mounts directly on the shaft and seals axially against the counterface, housing, bearing race, seal case or similar surfaces.


Contact Us

Call back request