For details please visit www.bjseal.com
Thermo Insulation products are mainly two different types:
All BJSEAL textiles are available in many sizes and with treatments other than those listed in this catalogue. While we have attempted to represent most of our products, we realize you may require a special size rope, a special width of fabric or tape, or a special coating. The applications for BJSEAL Textiles are many: from steel mills to oil refineries, chemical processing plants, power plants, wherever the need exits for a high temperature resistant textile product.
Service is BJSEAL edge in the world of high – temperature textile manufacturers. We’re large enough to handle big volume orders, while being flexible enough to make a short run to facilitate your small special order needs. We’ll even work with you in designing a product to meet those unique requirements.
Twisted rope is produced from a number of single yarns twisted together. The diameter of the rope is determined by the number and thickness of the yarn being used. Rope can be reinforced with stainless steel or inconel wire on request
Dia 3–4mm - 200M/roll /Dia 30mm - 25M/rollm
Dia 5–12mm -100M/roll Dia 40mm - 20M/roll
Dia 15–25mm-50M/rol Dia 50mm -10M/roll
Stove door seals,ovens,coke furnaces, thermal insulation of electrical wiring ,wrapping round pipes.
Supplied in round, square and rectangular section. Interlock braided constructions (1/8” and 3/16” plaited) Rope can be impregnated with PTFE, graphite etc,and stainless steel or inconel wire reinforced on request.
5 – 8mm 2 00M/roll 30mm 25M/roll
10 – 15mm 100M/roll 40mm 20M/roll
20 – 25mm 50M/roll 50mm 10M/roll
Static door seals for boilers, ovens, furnaces, kiln cars, heat exchanger, filter elements, wrappingexhaust.
Style BJ 3300 is a very flexible, soft easily compressible material mainly used by cast iron stove producers. The flexibility is necessary because of the coarse surface of cast iron products.
Diameter: 5 – 12mm
Roll length: 100M/roll
Used in gasketing, caulking of oven and furnace doors, including wood stoves and expansion joints
BJ 3600 Plain Woven Tapes Bolt Hole Tapes are also available in Heat Treated tan color finish, Pressure adhesive backing on one side and Stainless wire reinforced.
Width 10mm to 150mm
Thickness 0.8mm to 6.0mm
Length 30 meters per roll
Wrapping steam tracer lines,hose,piping,tadpole tapes,gasketing,curtains for ovens ,bolt hole tapes to place over bolts.
BJ 3700 Plain Woven Tapes and Bolt Tapes are also available in Heat Treated tan color finish, Pressure adhesive backing on one side and Stainless wire reinforced.
Width 10mm to 150mm
Thickness 0.8mm to 6.0mm
Length 30 meters per roll
Weight :400g/m2 to 3800g/m2 depending on its thickness
Wrapping steam tracer lines, hose, piping, tadpole tapes, gasketing, curtains for ovens, bolt hole tapes to place over bolts.
1.5mm and 3.0mm wall thickness is standard.
Inner diameter: 10 – 50mm 25M/roll
Cable and wire insulation’s hose covering, protection for hydraulic and electrical cables,gasketing,thermal insulation, cover tubes and pipes, cables and flexible can also be over braided immediately in our factory. Sleeves can also be coated with Silicone or other Rubber.
Manufactured from 100% E-Glass yarns and brass wire then coated with S.B.R. or natural rubber. Used in the Manufacture of boiler gaskets, folded tape, tadpole tape and luting. Brass wire prevents gaskets from dishing, gives more stability to the product .
Available in 1.5mm to 6.0mm
Thickness and width from 1m to 2M
Glass Fiber Tacky Gasketfabric is a non-asbestos product used for curtains for industrial ovens pipe thermal insulation.. For operating temperatures up to 290°C protect against steam, air water and gases. Mainly used for expansion joins and dust resistance
Tacky, dusted sides, graphite, and red and black. For operating temperatures to 290°C against steam, air water and gases.
BJ 3908 Glass fiber Tacky gasket tacky cloths are made to exceed the performance of other glass or asbestos-free tacky gasket cloths. They are easy to fold into gaskets and typically retain four to five times more of their original tensile than regular glass tacky cloths under the same load. They are better sealing, safer, longer lasting. Base cloth is made from 100% glass fiber yarn with wire. For operating temperatures to 290°C.
Thickness 1.5mm to 6mm
Mainly used for protest against steam, air, water and gases.
Dimensions: Width 1000mm standard 1500mm on request Length 50 meters standard per roll
Thickness: 0.4mm to 3.2mm
Weight: 300g/m2 to 2200g/m2 depending on its thickness Weave: plain
Fabric cloth are available also in heat Treated tan color finish
Welding cloths, protective clothing, finishing of insulation. Available also in Silicon Rubber coating, neoprene Rubber coating, Stainless Steel Wire reinforced for added strength, Aluminum Foil and Aluminized laminated fabrics.
Ceramic fiber is made from a mixture of silicium oxide and aluminum oxide. Both of these elements are in a very pure form, which is melted in an electric arc resistance furnace. This molten is spun into a fiber. Ceramic fiber as with other textile fibers should be processed in such a way that the amount of dust produced is kept to an absolute minimum. If the concentration is too high, the wearing of a mask is recommended. The precautionary measure is particularly advisable when processing free fibers. Because of their structure, finished textile products produce little dust.
Ceramic fiber can be spun just like the other fibers. They yarn so obtained can be twisted, intertwined or woven. A small quantity of organic fibers is added to increase mechanical resistance during processing. Such support vanishes with low temperature, affecting in no way the ceramic fibers characteristics, only the mechanical resistance is decreased. Ceramic yarn with a glass core reinforced increases its mechanical strength. For a higher tensile strength requirement, ceramic yarns are reinforced either with brass, stainless steel or inc onel wires.
Al2o3 approx. 47%
Sio2 approx. 52%
Others approx. 1%
Melting Point 1790°C
Density 2.5 – 2.75 gr/cm3
Specific Heat 1.05 Kj/KgK
Tensile Strength 50N/mm2
Average diameter 3 microns
Temperature Resistance With glass reinforced 650°C
With Inconel or Stainless steel Wire reinforced 1100°C
3 – 4 mm 200Mtrs/roll 30mm 25Mtrs/roll
5 –12mm 100Mtrs/roll 40mm 20Mtrs/roll
15–25mm 50Mtrs/roll 50mm 10Mtrs/roll
Cover joints, joints for stovedoors, insulation of pipes etc…
5 – 8 mm 100Mtrs/roll 20-25mm 30Mtrs/roll
10–15mm 50Mtrs/roll 30-80mm 10Mtrs/roll
Static seal for boilers, industrial furnaces, coke oven doors etc.
12 – 60mm 25Mtrs/roll
Insulation of pipes, Kiln-car joints, expansion/fire Joints in civil buildings (with certificate), coke ovendoors.
Length 25 Meters/roll
Between steel profiles of ovens, winding around pipes, Bolt –hole Tapes to place over bolts.
Inner Diameters : 8–60mm 25 mtrs/roll
To cover tubes and pipes, with electrical wires always use the glass reinforced type , cables or flexible can also be over braided immediately in the factory.
Dimensions: Custom Sizes
Sealing from oven doors, can be in hard or soft according to the applications.
Dimensions: All used dimensions available
Seals for manhole cover in boilers.
This cloth is available either with glass wire yarn reinforced or inconel wire reinforced
Thickness 2.0 mm to 3.0 mm
Length 25 Meters or 30 meter roll
Protective clothing, controlled cooling down of casting, finished insulation, furnace boiler, welding blankets etc..We can fabricate all desired dimension or shape, rubber aluminum or graphite coating as per demand.
Gloves made by a highly texturized fabric that with stands temperatures up to 600°C and resists most acids and alkaline. This comfortable wool-lined glove is designed for specific industrial and safety applications such as insulation for turbine engines, expansion joints, heat reflectors, welding blankets and asbestos encapsulation.
Kevlar fiber gloves Heat resistant glove is designed for heat resistance. Glove with a KEVLAR® fiber blend material. The work glove has a full wool lining for added heat resistance. This glove is a very thick and large glove that is designed for heat resistance; consequently, the dexterity of the glove is extremely limited. In addition, the high temp glove is also available with a leather reinforced palm, thumbs and fingers Ideal for foundries, glass blowing, and metal forging.
Dimensions: Available in several different shapes, long, short, and with five fingerless.
Foundry, welding gloves, ceramic industry, laboratory, steel mills etc.